Focusrite RedNet D16R helikaart

‌16x16 AES3 I/O With Dual PSUs

RedNet D16R is a 1U, 16x16 AES3 interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet D16R is the ideal choice for providing AES3 I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio. Perfect for bridging between digital consoles, power amplifiers or any other AES3-equipped audio equipment and any Dante network, RedNet D16R has SRC (Sample Rate Conversion) on each input pair allowing plug-and-play operation with any AES3 source.

Two rear-panel DB25 connectors wired to the AES59 standard provide eight pairs of AES3 I/O, while an additional pair of XLR connectors allows flexibility in cabling choice for one pair of I/O. Additional RCA connectors allow the connection of consumer S/PDIF equipment. All external audio inputs include sample rate conversion, further reducing cabling and clocking complexity. Word Clock I/O on BNC connectors allows external devices to clock to RedNet D16R, or alternatively allows RedNet D16R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.

• 16x16 AES3 I/O for Dante audio-over-IP networks
  
• Up to 24-bit, 192kHz sampling rates with sample rate conversion
  
• AES67 compliant
  
• Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
  
• Flexible input options: DB25, XLR, RCA
  
• Word Clock I/O and DARS input for increased flexibility
  
• Combined digital I/O to AES59 standard on DB25 connectors
  
• Comprehensive front-panel metering and indicators
  
• Remote monitoring software with powerful graphic user interface
  
• Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
  

Spetsifikatsioonid:

INPUT SAMPLE RATE CONVERTORS

• Sample Rate Range: 32 to 216 kHz
  
• Gain Error: -0.3dB
  
• Dynamic Range: > 138dB (-60 dBFS method)
  
• THD N: < -130dB (0.00003); 0 dBFS input
  
• Latency: 11 to 45 samples (network and input sample rate dependent).

DIGITAL PERFORMANCE

• Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
  
• Clock Sources: Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master
  

REAR PANEL CONNECTIVITY

• Channel Count: 2 x 2 S/PDIF Channels (reduces AES/EBU input channels)
  
• Input And Output: 2 x DB-25 connectors (AES59 Combined I/O / Tascam Digital)
  
• Alternate Input (Optional DARS): 1 x Female XLR (replaces DB-25 channels 1-2)
  
• Alternate Output: 1 x Male XLR (duplicates DB-25 channels 1-2)
  
• Input: 1 x RCA phono socket (replaces DB-25 channels 3-4)
  
• Output: 1 x RCA phono socket (switchable, duplicates any DB-25 channel pair)
  
• PSU: 2 x IEC Inputs with retaining clips
  
• Network: 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors
  
• AES/EBU Channel Count: 16 x 16 AES/EBU channels

FRONT PANEL INDICATORS

• Primary PSU (A): Green LED. Illuminates when an AC input is applied and all DC outputs are present.
  
• Secondary PSU (B):. Green LED. Illuminates when an AC input is applied and all DC outputs are present.
  
• Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4.
  
• Pull Up/Down:. Orange LED. Indicates unit is set to operate on a Dante pull up/down domain.
  
• Signal Indicators:. 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS.
  
• Secondary Network: Green LED. Indicates that a network connection is present on secondary port when in redundant mode
  
• Network Locked: Green LED. When unit is network slave, shows valid network lock
  
• Clock Source: Orange LED for each: Internal, Word Clock, DARS, Input 1–2 and Input 9–10

NETWORK MODES

• Redundant: Allows unit to connect to two independent networks
  
• Switched: Connects both ports to integrated network switch allowing daisy-chaining
  
• Dimensions: 44.5mm x 482.6mm x 263mm
  
• Weight: 3.84kg

POWER

• Power PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 30VA
  

HEAT PERFORMANCE

• Operating Temperature:. Operates at up to an ambient temperature of 50 degrees Celcius

Pakend sisaldab:

• Focusrite RedNet D16R x1