Focusrite Pro RedNet HD32R helikaart

‌32x32 Pro Tools | HD I/O With Dual PSUs

RedNet HD32R is a 1U, Pro Tools | HD™ interface for any Dante™ audio-over-IP network, providing up to 32x32 channels of I/O (16x16 at 192kHz) Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.

A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.

• 32x32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16x16 at 192kHz)
  
• Primary and Expansion DigiLink mini connections
  
• Up to 24-bit, 192kHz sampling rates
  
• AES67 compliant
  
• Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
  
• Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
  
• Comprehensive remote control and remote signal metering through RedNet Control
  
• Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.

Spetsifikatsioonid:

DIGITAL PERFORMANCE

• Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
  
• Clock Sources: Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master
  
• External Word Clock Range: Nominal sample rate ±7.5
  
• Channel Count: 32x32 at up to 96kHz sampling rate, 16x16 at 176.4 and 192kHz
  

REAR PANEL CONNECTIVITY

• Primary Port: 1 x Mini DigiLink
  
• Expansion Port: 1 x Mini DigiLink
  
• Word Clock Input: 1 x BNC 75O port (switchable termination)
  
• Word Clock Output: 1 x BNC 75O port
  
• PSU: 2 x IEC Inputs with retaining clips
  
• Network: 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors

FRONT PANEL INDICATORS

• Primary PSU (A): Green LED. Illuminates when an AC input is applied and all DC outputs are present
  
• Primary PSU (B): Green LED. Illuminates when an AC input is applied and all DC outputs are present
  
• Primary Network: Green LED. Indicates that a network connection is present on primary port when in redundant mode
  
• Secondary Network: Green LED. Indicates that a network connection is present on secondary port when in redundant mode
  
• Network Locked: Green LED. When unit is network slave, shows valid network lock. When unit is network master
  
• Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
  
• Pull Up/Down: Orange LED. Indicates unit is set to operate on a Dante pull up/down domain
  
• Signal Indicators: 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS
  
• Clock Source: Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master

NETWORK MODES

• Redundant: Allows unit to connect two independent networks
  
• Switched: Connects both ports to integrated network switch allowing daisy-chaining of device

• Dimensions: 44.5mm x 482.6mm x 263mm
  
• Weight: 3.9kg

POWER

• Power PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 30VA

HEAT PERFORMANCE

• Operating Temperature: Operates at up to an ambient temperature of 50 degrees Celcius
  

Pakend sisaldab:

• Focusrite RedNet HD32R x1