Yamaha MTX3 matrix processor

‌Yamaha MTX3 matrix processor

MTX3 26 x 8 Matrix Mixer / Signal Processor

• 8ch mic/line input and 8ch analog output
  
• 16ch YDIF digital I/O
  
• SD Card Slot for playback

The Heart of Your Sound Solution

Designed primarily for multi-zone commercial installations, MTX Series matrix processors are equipped with flexible processing functions that are essential to a wide variety of applications such as retail stores, restaurant/bars or banquet rooms. Responsible for the primary processing functions at the heart of your system's design, MTX processors allow you to configure, program, and manage your entire sound solution via the intuitive interface of the accompanying MTX Editor software application. The series is comprised of two models with varying DSP capacities and expansion capabilities, allowing MTX processors to meet the demands of a truly impressive range of commercial environments.

Central Management of Multiple Sound Systems from a Single PC

MTX-MRX Editor is a software application that is dedicated to the setup and management of sound systems built around the MTX and MRX series signal processors. It can mix audio from microphones, CDs, MP3 and WAV files, deliver different content to multiple zones, set up timer-activated music playback and announcements, and much more. MTX-MRX Editor makes it easy to manage and distribute sound that is optimized for separate areas of a store or facility from a single computer.

SD Memory Card Slot for playback

The MTX Series feature an input/output configuration that is ideal for a wide range of applications: 8 mono inputs (mic/line), 2 stereo inputs (line) and 16 digital inputs via YDIF. The output side consists of 8 line-level mono outputs and 16 digital outputs via YDIF. MTX processors also feature an SD Card Slot for playback of MP3/WAV files stored on an SD Memory Card. The Event Scheduler function allows you to play back these files as music, announcements or chimes—or even trigger external devices with a GPI output—at scheduled times, as well as recall presets stored within the MTX.

Spetsifikatsioonid:

• Memory bank: PRESET: 50
  

Mixing Capacity: 

• Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix
  
• Output Busses : 8 Mono

Input Channel Functions

• Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4)
  
• Stereo CH: 3-band PEQ, Comp, Auto Gain Control

• Output Channel Functions: Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter
  
• Internal Processing: Priority Ducking, Ambient Noise Compensator
  
• Sampling frequency rate: 48kHz/ 44.1kHz
  
• Signal delay: Less than 2.5ms (AD-DA @48kHz)
  
• Total harmonic distortion*1: Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)

• Frequency response; 20Hz to 20kHz, +0.5dB, -1.5dB
  
• Dynamic range: 107dB (Gain:-6dB)
  
• Hum & noise level (20Hz to 20kHz), Rs=150Ω: -60dBu (Gain：+66dB), -83dBu (Gain：-6dB)
  
• Phantom Power: +48V
  
• Crosstalk (@1kHz): -100dB
  
• Heat diffusion: 43kcal/h max
  
• Power requirements: AC100V-240V 50Hz/60Hz
  
• Power consumption: 50W

• Mõõtmed: 480 x 44 x 362mm
  
• Kaal: 4,8 kg

Pakend sisaldab:

• Yamaha MTX3 matrix processor 1 tk