Suurel reedel, 29. Märtsil, on Progeari müügisalong ja e-poe klienditugi suletud. Pühade ja nädalavahetuse ajal saabunud veebitellimused käsitletakse esmaspäeval, 1. aprillil. Rahulikke pühi!

Vanguard Audio Labs Lolli V1 FET kondensaator mikrofon

SKU
V1LOLLI
890,00 € 729,51 €

Leidsite soodsama hinna?

Toode on hetkel laost otsas.<br>Küsi meilt tarneaega! Toode on hetkel laost otsas.
Küsi meilt tarneaega!

Progear on turvaline ostukoht internetis

Turvaline ostukoht on E-kaubanduse Liidu poolt väljastatav usaldusmärgis Eesti e-poodidele. Usaldusmärgisega e-poodidest ostmine on tarbija jaoks turvaline, sest e-poe müügitingimused vastavad seaduses kehtestatud nõuetele ning nende tegevust monitooritakse liidu poolt järjepidevalt.
Loe lähemalt siit

Progeari kaupade eest saab tasuda Inbank-, LHV- ja Holm Pank Liisi järelmaksu teenustega. Lisainfo taotlemise kohta: https://www.progear.ee/makseviisid-ja-jarelmaks/

Eesti piires Hind Tasuta tarne alates
Pakiautomaat või pakipood 3 € 79 €
Kuller 6 € 149 €

Juhul kui e-poest ostetud kaup Sulle mingil põhjusel ei sobi, saad toote(d) ennem kasutusel võtmist tagastada 14 päeva jooksul. Ostusumma tagastame viivitamata, kuid mitte hiljem kui 14 päeva jooksul (vastavalt e-poe müügitingimuste puntkile 4.).

Toote tagastamiseks palume täita tehingust taganemise avalduse vorm või saata vabas vormis taganemisavaldus e-posti aadressile progear@progear.ee. Toode tuleb tagastada või tagasi saata Progeari müügisalongi Artelli 19, 10621, Tallinn, EE.

V1+LOLLI – Pencil Condenser Kit

The Vanguard V1+LOLLI is a multi-capsule FET pencil condenser microphone. Lovingly crafted by experts over several years, it is designed to be a versatile, reliable, professional tool for any recording engineer, studio, producer, or artist. Five total custom-voiced capsules – in both small- and large-diaphragm formats, and with multiple pickup patterns – allow for a cornucopia of tonal variations for virtually any sound source or recording situation. With a “straight-wire” circuit design, premium cryogenically-treated FET componentry, an unparalleled selection of capsules, and a true heavy-duty shockmount, the V1+LOLLI is the most versatile mic’ing system you’ll find.

Overview

Vanguard V1 Microphone – packed with high-end componentry including an ultra-quality precision-biased JFET, a custom-wound transformer, premium capacitors, and cryogenic treatment throughout. A “straight-wire” design philosophy means there’s only four components between the capsule and the output.

Four 22mm Capsules – these interchangeable capsules give you unmatched flexibility – cardioid, wide cardioid, hypercardioid, and omnidirectional. Ultra-sensitive 4-micron diaphragms, an anti-comb-filtering front design, and precision-machined backplates give wide consistency across each capsule.

V34C “LOLLI” Removable Multi-Pattern Large-Diaphragm Capsule Head – our patent-pending interchangeable large-diaphragm multi-pattern head. Our custom-voiced 34mm edge-terminated 3-micron diaphragm dual-capsule assembly housed in a precision-machined aircraft-grade aluminum body. Switchable between omni and cardioid…and aesthetically gorgeous to boot.

VSSM Shockmount – the best pencil shockmount in the ‘verse. Heavy-duty cast zinc partners with high-impact ABS to create a shockmount that stays where it’s supposed to. Aerospace-grade suspension rings keep the rumble out (no hair scrunchies here!), and a windowed design allows you to easily access switches without changing the your mic placement.

Pinewood Storage Case – because your microphones should stay safe in luxury. We’ve carved individual capsule pockets into a block of solid pine, and custom-cut foam for your mics to stay cozy and secure…whether they’re on the road or in your studio.

Features

Capsule & Electronics

  • 4 small-diaphragm 22mm capsule assemblies – cardioid, hypercardioid, omnidirectional, wide cardioid
  • Large-diaphragm V34C “Lolli” multi-pattern capsule assembly
  • Transformer-balanced solid-state circuit
  • Ultra low-noise high-quality hand-biased JFET and other premium-grade components
  • Deep-cycle cryogenic treatment of critical signal & power path components
  • Transformer-balanced output – custom-wound humbucking dual-bobbin transformer
  • Works via 48V phantom power

Spetsifikatsioonid:

  • Transducer Type: Condenser
  • Capsule Size (V34C) : 1.34″ / 34mm (dual-capsule)
  • Diaphragm Size (V34C): 1.04″ / 26.4mm
  • Capsule Diaphragms Thickness (v34C): 3µm
  • Capsule Size (Small-Diaphragm): 0.87″/22mm
  • Diaphragm Size (Small-Diaphragm): 0.78″ / 16mm
  • Capsule Diaphragm Thickness (Small-Diaphragm): 4µm
  • Electronics Type: Solid-state, transformer-balanced output
  • Output Impedance: 200Ω
  • Max SPL: 136dBA (0.5% THD @ 1000Hz)
  • Frequency Response: 20Hz-20kHz
  • Equivalent Noise Level: <15dBA
  • S/N Ratio: TBA
  • Sensitivity: TBA
  • Output Connector: Male XLR 3-pin, gold-plated
  • High-Pass/Rolloff Switch: N/A
  • Attenuation/Pad Switch: N/A
  • Finish: Polished nickel trim / High-gloss Pinot Noir
  • Weight (microphone): TBA
  • Weight (in case): TBA
  • Dimensions (microphone): TBA
  • Dimensions (case): TBA
  • Voltage Requirement: Phantom Power (+48V ideal)

Pakend sisaldab:

  • 22mm removable capsule - kardioid
  • 22mm removable capsule - hüperkardioid
  • 22mm removable capsule - mitmesuunaline
  • 22mm removable capsule - lai kardioid
  • V34C “Lolli” removable multi-pattern capsule assembly
  • VSSM small shockmount 1 tk
  • Polsterdusega transpordikast 1 tk

Küsi selle toote kohta lisainfot müügispetsialistilt

Andreas Reinula

progear@progear.ee

+372 6728 280

Write Your Own Review
Kirjutage arvustusVanguard Audio Labs Lolli V1 FET