Tarm 2.5

SKU
tarm 2.5
1 919,00 € 1 599,17 €

Leidsite soodsama hinna?

Laost otsas Laost otsas

Progear on turvaline ostukoht internetis

Turvaline ostukoht on E-kaubanduse Liidu poolt väljastatav usaldusmärgis Eesti e-poodidele. Usaldusmärgisega e-poodidest ostmine on tarbija jaoks turvaline, sest e-poe müügitingimused vastavad seaduses kehtestatud nõuetele ning nende tegevust monitooritakse liidu poolt järjepidevalt.
Loe lähemalt siit

Progeari kaupade eest saab tasuda Inbank-, LHV- ja Holm Pank Liisi järelmaksu teenustega. Lisainfo taotlemise kohta: https://www.progear.ee/makseviisid-ja-jarelmaks/

Eesti piires Hind Tasuta tarne alates
Pakiautomaat või pakipood 3 € 79 €
Kuller 6 € 149 €

Juhul kui e-poest ostetud kaup Sulle mingil põhjusel ei sobi, saad toote(d) ennem kasutusel võtmist tagastada 14 päeva jooksul. Ostusumma tagastame viivitamata, kuid mitte hiljem kui 14 päeva jooksul (vastavalt e-poe müügitingimuste puntkile 4.).

Toote tagastamiseks palume täita tehingust taganemise avalduse vorm või saata vabas vormis taganemisavaldus e-posti aadressile progear@progear.ee. Toode tuleb tagastada või tagasi saata Progeari müügisalongi Artelli 19, 10621, Tallinn, EE.

The tarm 2.5 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2'700 mW after optics.

The tarm 2.5 (ShowNET) units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.

The tarm 2.5 (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The benefits include:

  • 2'700 mW guaranteed output power
  • a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and good color fading
  • the tarm 2.5 impresses with a very bright 637 nm single mode red
  • trim pots for adjusting color intensity

The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of less than 0.9 mrad (full angle). It is equipped with a bright red (750 mW / 637 nm), a green (700 mW / 520 nm), and a blue (1'500 mW / 450 nm) diode laser source.

The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 50° (@30 kpps). Thus they are well graphics capable and suitable for professional laser applications. Optionally as upgrade available: CT-6210H scanners with 60 kpps@8° ILDA and a max. scan angle of 60°.

This show laser light has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel. The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum. The mounting bracket allows for hanging and for upright mounting of the laser system. The tarm 2.5 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 2.5 features an integrated ShowNET network interface with free laser control software included!

Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 2.5 (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.

The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!

There are two different DMX modes:

  • (1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
  • (2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show. The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Hardware features of integrated ShowNET:

  • X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis)
  • Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green
  • DMX512 input and output (non-isolated)
  • 100 Mbit Ethernet port
  • Flexible IP address setting: static address, DHCP or AutoIP
  • Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN
  • standalone operation and DMX IN/OUT via DMX-Adapter
  • Maximum scan speed ~100.000 points per second
  • Up to 16 devices can be used in parallel for multiprojector laser shows
  • Built-in ArtNet-to-DMX converter

Spetsifikatsioonid:

  • Guaranteed power at aperture: 2'700 mW
  • Power Red: 700 mW / 637 nm
  • Power Green: 750 mW / 520 nm
  • Power Blue: 1'500 mW / 450 nm
  • Beam Specifications (full angle): ca. 3.5 mm / < 0.9 mrad
  • Laser Sources: Diode
  • Laser Class: 4
  • Operation Modes: ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave
  • Scanner: 45kpps ILDA 8°
  • optional CT-6210H (LF): 60kpps ILDA 8°; max. 60°.
  • Scan Angle max.: max. 50°
  • Accessories: power cable, manual, key, interlock connector, full version Showeditor software license included
  • Power Supply: 85 V - 250 V / AC
  • Power Consumption: 100 W
  • Dimensions: 220 / 220 / 150 mm
  • Weight:  7 kg

Pakend sisaldab:

  • Tarm 2.5 laser valgusefekt 1 tk
  • Interlock ühendus 1 tk
  • Toitekaabel 1 tk
  • Võti 1 tk

Küsi selle toote kohta lisainfot müügispetsialistilt

Mikk Saar

Mikk Saar

mikk@progear.ee

+372 6728 280

Write Your Own Review
Kirjutage arvustusTarm 2.5